3 Select > Average Location 4 Move to the waypoint location. 5 Select Start 6 Follow the on-screen instructions. 7 When the confidence status bar reaches 100%, select Save For best results, collect 4 to 8 samples for the waypoint, waiting at least 90 minutes between samples. To remove the point from the route, select Remove Reversing a Route 1 Select > Route Planner 2 Select a route. 3 Select Reverse Route Viewing a Route on the Map 1 Select > Route Planner 2 Select a route. 3 Select View Map Projecting a Waypoint You can create a new location by projecting the distance and bearing from a marked location to a new location. 1 Select > Waypoint Manager 2 Select a waypoint. 3 Select > Project Waypoint 4 Enter the bearing, and select 5 Select a unit of measure. 6 Enter the distance, and select 7 Select Save Viewing the Active Route 1 Select > Active Route 2 Select a point in the route to view additional details. Deleting a Route 1 Select > Route Planner 2 Select a route. 3 Select Delete Route > Yes Deleting a Waypoint 1 Select > Waypoint Manager 2 Select a waypoint. 3 Select > Delete > Yes Tracks A track is a recording of your path. The track log contains information about points along the recorded path, including time, location, and elevation for each point. Routes A route is a sequence of waypoints or locations that leads you to your final destination. Recording Track Logs 1 Select > Setup > Tracks > Track Log 2 Select Record, Do Not Show or Record, Show On Map Creating a Route 1 Select > Route Planner > Create Route > Select First Point 2 Select a category. 3 Select the first point on the route. 4 Select Use > Select Next Point 5 Select and repeat steps 3 through 5 to add all the points in If you select Record, Show On Map , a line on the map indicates your track. 3 Select Record Method 4 Select an option:
To record tracks at a variable rate that create an optimum representation of your tracks, select Auto To record tracks at a specified distance, select Distance To record tracks at a specified time, select Time 5 Select Interval 6 Complete an action: the route. 6 Select Editing the Name of a Route 1 Select > Route Planner 2 Select a route. 3 Select Change Name 4 Enter the new name, and select If you selected Auto for the Record Method , select an option to record tracks more or less often. NOTE:
Using the Most Often interval provides the most track detail, but fills up the device memory quicker. If you selected Distance or Time for the Record Method , enter a value, and select As you move with the device turned on, a track log is created. Navigating a Saved Route 1 Select > Route Planner 2 Select a route. 3 Select View Map > Go 4 Navigate using the compass ( page 11 ) or map ( page 11 Viewing Details about the Track 1 Select > Track Manager 2 Select a track. 3 Select View Map Editing a Route 1 Select > Route Planner 2 Select a route. 3 Select Edit Route 4 Select a point. 5 Select an option:
The beginning and the end of the track are marked by flags. 4 Select the information bar along the top of the screen. Information about the track is listed. Viewing the Elevation Plot of a Track 1 Select > Track Manager 2 Select a track. 3 Select Elevation Plot To view the point on the map, select View Map To change the order of the points on the route, select Move Up or Move Down To insert an additional point on the route, select Insert The additional point is inserted before to point you are editing. Navigating to the Start of a Track You can navigate back to the beginning of a track. This can be helpful when finding your way back to camp or the trail head. 1 Select > Track Manager > Current Track > View Map 10 Waypoints, Routes, and Tracks