Navigation Navigation features and settings also apply to navigating courses ( Courses , page 29 ) and segments ( Segments , page 11 ). Locations and finding places ( Locations , page 25 ) Planning a course ( Courses , page 29 ) Route settings ( Route Settings , page 33 ) Map settings ( Map Settings , page 32 ) Locations You can record and store locations in the device. Marking Your Location Before you can mark a location, you must locate satellites. If you want to remember landmarks or return to a certain spot, you can mark a location. 1 Go for a ride. 2 Select Navigation > > Mark Location > . Saving Locations from the Map 1 Select Navigation > Browse Map .
2 Press and to browse the map for the location. 3 Hold to select the location. Location information appears at the top of the map. 4 Select the location information. TIP: Press to toggle between map browsing options. 5 Select > Save Location > . Navigating to a Location TIP: You can use the Location Search glance to perform a quick search from the home screen. If necessary, you can add the glance to the glance loop ( Customizing the Glances , page 63 ). 1 Select Navigation . 2 Select an option: Select Browse Map to navigate to a location on the map. Select Courses to navigate using a saved course ( Courses , page 29 ). Select MTB Trail Navigation to navigate to a mountain bike trail network.
Select Search to navigate to a city, point of interest, or saved location. Select Saved Locations to navigate to a saved location. Select Recent Finds to navigate to one of the last 50 locations you have found. Select > Searching near: to narrow your search area. 3 Select a location. 4 Select Ride . 5 Follow the on-screen instructions to your destination. Navigation Edge® 540 Owner's Manual 25