Introduction Manual Conventions In this manual, when you are instructed to select an item using the Channel knob, turn the channel knob to highlight the item, and the press the Channel knob to select the item. Small arrows (>) in the text indicate that you should use the Channel knob to select each item in order. For example, if the text indicates “select COMMUNICATIONS > PROTOCOL ,” you should complete these steps: 1. Turn the Channel knob to highlight COMMUNICATIONS , and then press the Channel knob to select COMMUNICATIONS . 2. Turn the Channel knob to highlight PROTOCOL , and then press the Channel knob to select PROTOCOL .
VHF 100/200 Series and GHS 10 Series Instructions This manual provides instructions for the following units: Unless otherwise noted, the instructions for the VHF 100/200 Series radios and the GHS 10 Series handsets are the same. ii VHF 100/200 Series Owner’s Manual VHF 100 VHF 100i VHF 200 VHF 200i ATIS support ● ● Private channel customization (pre-set by your Garmin® dealer) ● ● Multilingual user interface: English, French, Italian, German, and Spanish ● ● North American Models International Models VHF 100 VHF 100i VHF 200 VHF 200i GHS 10 GHS 10i