Table 7. Control panel error messages Message Cause Solution CANCELED FAX. CLEAR DOCUMENT FEEDER. The S TOP /C LEAR key was pressed to cancel the current job while pages were feeding from the document feeder tray. The cancel process will not automatically clear the document feeder. Pull the document release door open, remove the jammed item, and close the door. Then, clear the items in the document feeder tray and start over. CANCELED SCAN. CLEAR DOCUMENT FEEDER The S TOP /C LEAR key was pressed to cancel the current job while pages were feeding from the document feeder. The cancel process will not automatically clear the document feeder.
Pull the document release door open, remove the jammed item, and close the door. Then, clear the items in the document feeder tray and start over. COMMUNICATION ERROR Fax communication error occurred between the product and the sender or receiver. Allow the product to retry sending the fax. Unplug the product telephone cord from the wall, plug in a telephone, and try making a call. Plug the product phone cord into a jack for another phone line. See chapter 6, “Troubleshooting.” COPY COUNT SET TO 1 The product does not have enough memory to complete the collated copy job. Continue completing the collated copy job. DEVICE BUSY. TRY AGAIN LATER The product is currently in use.
Wait for the product to finish the current job. DEVICE ERROR. PRESS [ENTER] TO RESUME There was an internal error in the product. Press E NTER /M ENU to resume the job. DOCUMENT FEEDER JAM A piece of media is jammed in the document feeder tray. Open the document release door, clear the jam, close the document release door, and reload the paper into the document feeder tray. DOCUMENT FEEDER MISPICK. RELOAD MEDIA Media in the document feeder tray was not picked up. Remove and reload the media into the document feeder tray. EN Control panel error messages 37