Paper-handling menu When paper-handling settings are correctly configured through the control panel, you can print by choosing the type and size of media from the printer driver or software application. Some items in this menu (such as duplex and manual feed) are available from a software application, or from the printer driver (if the appropriate driver is installed). Printer driver and software application settings override control panel settings. Table 22. Paper handling menu Item/Default value Values Explanation ENVELOPE FEEDER SIZE=COM10 (110 V printers) or SIZE=DL (220 V printers) For supported print media sizes, see page 28.
This item appears only when the optional envelope feeder is installed. Set the value to correspond with the envelope size currently loaded in the envelope feeder. ENVELOPE FEEDER TYPE=PLAIN For supported print media types, see page 28. This item appears only when the optional envelope feeder is installed. Set the value to correspond with the envelope type currently loaded in the envelope feeder. TRAY 1 MODE= FIRST FIRST CASSETTE Determine how the printer will use tray 1. FIRST : If print media is loaded in tray 1, the printer will pull media from that tray first. CASSETTE :
A media size must be assigned to tray 1 using the TRAY 1 SIZE option (the next item in this menu when TRAY 1 MODE=CASSETTE ). This allows tray 1 to be used as a reserved tray. TRAY 1 SIZE= LETTER (110 V printers) or A4 (220 V printers) For supported print media sizes, see page 25 through page 27. This item appears only when TRAY 1 MODE= CASSETTE . Set the value to correspond with the media size currently loaded in tray 1. TRAY 1 TYPE= PLAIN For supported print media types, see page 28. This item appears only when TRAY 1 MODE= CASSETTE . Set the value to correspond with the print media type currently loaded in tray 1. TRAY 2 TYPE= PLAIN For supported print media types, see page 28.
Set the value to correspond with the media type currently loaded in tray 2. EN Chapter 3 Printer operation 57