Safety requirements EN 1 Safety requirements 1.1 Summary of general security issues Carefully read the following safety precautions to avoid injury and to prevent damage to this product or products connected to it. To avoid possible dangers, please be sure to use this product in accordance with the regulations. Only professionally authorized personnel can perform repairs. Use the right power cable. Use only the power cable approved by your country. Ground the product. To avoid electric shock, the product is grounded through the grounding conductor of the power cable. The grounding conductor must be connected to the ground before connecting the input or output end of the product.
Ensure that the product is properly grounded. Check all terminal ratings. To avoid fire or excessive current, check all rated values and marking instructions on the product. Please consult the product manual for details before connecting the product. Do not open the cover. Do not run the product when the outer cover or panel is open. Avoid circuit exposure. Do not touch exposed wire terminals and electronic components after the power supply is switched on. Do not perform operations when you suspect that the product is faulty. If you suspect that the product has been damaged, have it inspected by a qualified maintenance person. Maintain proper ventilation.
Do not operate in a damp environment. Do not operate in inflammable and explosive environment. Please keep the product surface clean and dry. Copyright Qingdao Hantek Electronics Co., LTD HDP10000 series user manual 1