Setup and Operation 3.10 Programming the user times Setup and Operation 3.11 Output of ID data For programming the signal time for monostable output signals, 9 fixed signal times between 0.02 s and 10 s are available. In addition, three different signal times between 0,01s and 599,99s can be set by the user. The outputs are deactivated if the setting is 0.00 s. This function is used to retrieve ID data, e.g. article numbers and various ma nufacturing data.
Output mode Change to the next output Return to counter ope ration Programming mode Select a position Set position Save and go to the next user setting; after + user 3, return to dis play mode Keep pressed and switch voltage on press press + or simultaneously Keep pressed and switch voltage on press press press Display row 1 Display row 2 simultaneously Article number Manufacturing date Function code Fn, Display-Row 1 Serial number Function No. Display Row 2 Software number Sets the Signal Times 0* Signal time 1 Software release 1 Signal time 2 2 Signal time 3 30 31