Pulse counter Pulse counter Trail Preset P 0 (F10) Coincidence signal monostable, P 1 (F8+F11) trail signal, symmetrical, P 2 (F12) Coincidence signal monostable 5.4 Programming the counter function codes Program ming mode Change function Save and change to next func Return to display Counter reading Preset 0 Preset 2 Reset P 2 - P 1 P 2 + P 1 setting mode P 1 (Relay) Signal time Signal time tion P 2 (Relay) Signal time + or Signal time P 0 electronic (Application output) and simultaneously turn Voltage On Keep pressed press press press P 1 electronic Signal time Signal time P 2 electronic Signal time display of function Alternative + The function codes are displayed as text in row 1.
By pressing both keys simultane ously you can change to the numeri cal display (F 0 to F 35). After pressing these keys once again the number of the selectable options will be displayed in addition. This setting will be stored. Range signals P 0 (F10) Coincidence signal monostable P 1 + P 2 range signal codes Counter reading Reset P 1 (Relay) P 2 (Relay) Function code F0, Display Row 1: Signal time P 0 electronc (Application output) Function No. Display Row 2 P 1 electronic Factory Setting (Defaults) P 2 electronic 0* No Function 1 All Function Codes are set to the values marked with * 42 43 Preset 0 Preset 1 Preset 2