Troubleshooting Scanner paper jams (MFP only) 1. If while feeding paper into the Scanner a jam occurs, use the eject button on the Touch Control Panel to clear the jam. 2. Unlatch the CIS Cover. 3. Open the CIS and clear the area of any paper. The basket was damaged during the product setup 1. There are three plastic parts that could break during product installation and need replacing. 2. Check the parts table and graphics in Parts and Diagrams to identify what service parts you must order. See Product Support on page 178 . 3. Replace the component. See Bin Assembly on page 210 . ENWW Product Troubleshooting trees (MFP) 11