Touchscreen control panel 1. Remove the following components: ● Tray 2 cassette ● Right cover. See Right cover on page 12 . ● Left cover. See Left cover on page 11 . ● Top cover assembly. See Top cover with touchscreen control-panel module on page 16 . 2. On the underside of the top cover assembly, remove six screws (callout 1) and the protective plate (callout 2). Figure 1-22 Remove the touchscreen control panel (1 of 3) 1 12 1 3. Disconnect the flat cable (callout 1), and then remove the following parts: ● Holder (callout 2) ● Pin (callout 3) 18 Chapter 1 Removal and replacement ENWW