4. Remove one screw (callout 1), and then remove the Tray 1 pickup solenoid. Figure 1-48 Remove the Tray 1 pickup solenoid (2 of 2) 1 Duplex solenoid 1. Remove the following components: ● Tray 2 cassette ● Left cover. See Left cover on page 13 . ● Scanner assembly. See Scanner assembly on page 13 . ● Control panel. See Control panel on page 15 . ● Right cover. See Right cover on page 17 . ● Rear cover, rear door, and duplex-paper-feed assembly. See Rear cover, rear door, and feed assembly on page 20 . ● Top cover assembly. See Top cover on page 18 . ● Fan. See Fan on page 39 . ● Duplex drive assembly. See Duplex drive assembly on page 31 . 2.
Open the toner cartridge door and the rear jam access door. ENWW Removal and replacement procedures 35