Turning the OmniBook On and Off • On. Press the blue power button to turn on the OmniBook. • Standby. The display turns off automatically if the computer is inactive for about 2 minutes. • Suspend. Click Start, Suspend (Windows 95) or Start, Shut Down, Standby (Windows 98 or 2000), or press the blue power button briefly (about 1 second) to suspend activity when the OmniBook is on. When you turn on the computer, it resumes your previous work session. Closing the lid (for more than 2 seconds) also suspends the computer. • Hibernate. Press Fn+F12. This is like Off, except that your current work session is first saved to disk.
When you turn on the computer, it reboots and restores your previous session. • Off . Click Start, Shut Down. If the OmniBook does not respond, press and hold the blue power button until the display shuts down. When you turn on the computer, it reboots. Unsaved data is lost. Table 1-3. Activating Power Modes 1-4 Product Information HP OmniBook 900 Power Mode To Enter Mode To Turn Back On Standby Reduced-power/stopped state. Display is off. Everything is in a reduced-power state. Network devices are maintained. Your current work session continues at turn-on (any key or pointer action). Press Fn+S (not Windows 98 or 2000) –or– allow time-out.
Press any key or move a pointing device to display the current session ("Instant-On"). Suspend Low-power/stopped state. Lower power state than Standby. Everything is off or in a low-power state. Network devices are off. Your previous work session resumes at turn-on. For plug-and-play operating systems, network connections resume at turn-on. Press blue power button for about 1 second –or– click Start, Shut Down, Standby (Windows 98 or 2000) –or– click Start, Suspend (Windows 95) –or– allow time-out. Press blue power button to display the current session ("Instant-On"). Hibernate No-power/stopped state. Session is saved on the hard disk. Everything is shut down.
Computer reboots at turn-on and restores previous session and network connections (if plug-and-play). Press Fn+F12 –or– allow time-out. Press blue power button to restart and restore the previous session. Off No-power/stopped state. Everything is shut down (battery continues charging if ac adapter is connected). Computer reboots at turn-on and restores network connections. Click Start, Shut Down –or– Press and hold the blue power button until the display shuts down. Press blue power button to restart with a new session.