Rapid heating en 8.2 Switching off the appliance 8.6 Setting the type of heating and temperature Switch your appliance off when you are not using it. The appliance will switch itself off automatically if it is not used for a certain period of time. ▶ Press to switch the appliance off. a The appliance switches off. Any functions currently Requirement: The operating mode "Types of heating" has been selected. 1. Press the type of heating that you want to use. in progress are cancelled. a The time or residual heat indicator appears in the If you cannot see the type of heating in the touch displays, use the control ring to scroll though the se- lection list.
a The temperature is highlighted in white. display. 2. Use the control ring to set the temperature. 3. Press to start. a The appliance starts heating. a The target temperature, the time and how long the 8.3 Starting operation You must start each operation. ATTENTION! If there is water on the cooking compartment floor when operating the appliance at temperatures above 120 °C, this will damage the enamel. ▶ Do not use the appliance if there is water on the cooking compartment floor. ▶ Wipe away any water on the cooking compartment floor before operation. appliance has already been in operation are shown in the display. 4. When the food is ready, press to switch the appli- ance off. Tip:
The most suitable type of heating for your food can be found in the description of the type of heating. Note: You can also set a cooking time and end time on the appliance. → "Time-setting options", Page 14 ▶ Press to start. a The settings, the running time, the display ring and the heating line appear in the display. Changing the type of heating When you change the type of heating, the other set- tings will also be reset. 1. Press to pause operation. 2. Press "Types of heating". 3. Press the type of heating that you want to use. a The corresponding default temperature appears in 8.4 Pausing or cancelling operation You can briefly pause operation and then continue.
If you cancel operation completely, the settings will be re- set. 1. To pause operation briefly: ‒ Briefly press . ‒ To continue operation, press . 2. To cancel operation completely, press and hold the display. Changing the temperature Once operation has started, you can change the tem- perature directly. ▶ Use the control ring to change the temperature. a The temperature is applied immediately. for approx. 3 seconds. a Operation will stop and all the settings will be reset. 8.5 Setting the operating mode Once you have switched on the appliance, it suggests an operating mode, e.g. types of heating. 1.
If you want to use a different operating mode to the In most cases, you can call up information about the function that you have just started. The appliance dis- plays some information, e.g. to ask you to do/confirm something or to issue a warning, automatically. 1. Press . a If available, information is displayed for a few 8.7 Displaying information one suggested, press . a The list of operating modes is displayed. → "Operating modes", Page 8 2. Press the operating mode that you want to use. 3. To implement other settings, press the relevant text fields. 4. Use the control ring to change the values. 5. Press to start. seconds. 2.
Use the control ring to scroll through longer pas- sages of text. 9 Rapid heating To save time, you can shorten the preheating time for set temperatures of 100 °C and higher. You can use rapid heating for the following types of heating: Ў 4D hot air Ў Top/bottom heating 9.1 Setting rapid heating To ensure an even cooking result, do not place the food in the cooking compartment until rapid heating has come to an end. Note: Do not set a cooking time until rapid heating has come to an end. 1. Set a suitable type of heating and a temperature of at least 100 °C. 13