Select Items 2. Start Load 3. Run Max Load 3) The test result will be displayed as follows: Static-volt 12.36V Start-volt 11.30V Start-volt ＞ 9.6V The diagram respectively shows the current test voltage (static voltage) is 12.36V, the standard voltage is 9.6V (for 6V system, the standard voltage is 4.8V; for 24V system, the standard voltage is 16V), and the lowest start-up voltage is 12.30V during startup. 4) Start the car, the tester will automatically test and record the minimum voltage that the battery output during starting the car. 5) Press the button will return to step (2).
5.3.3 Start load test results instruction ◆ If the lowest voltage is greater than 9.6V (for 6V systems, voltage is greater than 4.8V; for 24V systems, voltage is greater than 16V), the startup system is good. ◆ If the minimum voltage is less than 9.6V (for 6V systems, voltage is less than 4.8V; for 24V systems, voltage is less than 16V), the startup system is problematic. Please check the relevant parts such as connection points, wires, starters, and whether there is rust at the battery terminals. 5.4 Maximum Load Test 5.4.1 Preparation before testing If the car is flameout, please start the car.
HT2018B(C) Battery System Tester 9 Data reference table (12V system) Startup voltage battery discharge performance Treatment Above 10.7V Good need to observe 10.2~10.7V Common need to observe 9.6~10.2V Bad need to be replaced recently Below 9.6V Very Bad need to be replaced immediately