English Cleaning the Print Head If printing becomes faint or uneven and the INK OUT LED is not on or flashing, press the CLEANING button until the printer mechanism begins to clean the print head (more than 3 seconds). When the cleaning stops, the printer is ready for normal printing. Transporting To transport this printer, follow these steps: 1. Remove the ink cartridge. 2. Turn off the power supply. 3. Check that the POWER LED is off. 4. Remove the power supply connector. 5. Keep the printer upright while you pack it. Limitations on Placing an Object on Top of the Printer Be careful about placing heavy items on top of the printer.
The mass of any object placed on the printer must be 98 N (10 kgf) or less. If the mass is between 19.6 N (2 kgf) and 98 N (10 kgf), you must be careful about the limited area shown in the illustration. ❏ If the object has rubber feet or other such supports on its bottom surface, the feet must not rest on the limited area. ❏ If the object has a perfectly flat bottom surface, the bottom surface must extend beyond the edges of the limited area, as shown in the illustration. limited area TM-J2000/J2100 User’s M anual 11