INTRODUCTION IN-17 Hand Riveter RIVET INSTALLATION 1. RIVET INSTALLATION (1) Apply touch-up paint at the area. (2) Select an installation tool. Nose Piece Air Riveter (P/N 09050 - 20010) Nose Piece (3) Select the smallest a nosepiece possible for a rivets mandrel. NOTE: Wrong selection of a nose piece may cause the riveter to be damaged or bad tightening. Nose Piece Nose piece of Air Riveter (4) Insert the nosepiece to the riveter and then the man- drel of the new rivet into the nose piece (5) Vertically insert the rivet into a hole and keep place it strongly. NOTE: If the tip of the rivet is not deformed or the mandrel is not cut, repeat process (5) again.
Item Installation tool Aluminum-Rivet Waterproof-Rivet with φ4.8 mm Hand Riveter or Air Riveter Steel-Rivet Waterproof-Rivet with φ6.0 mm T-Rivet with φ6.4 mm Air Riveter Parts Name Parts Number Color Rivet type Nose piece No. 1 09050 -02020 Silver φ4.0 mm Aluminum φ4.0 mm Steel φ4.8 mm Waterproof Nose piece No. 2 09050 -02030 Copper φ4.8 mm Aluminum φ4.8 mm Steel Nose piece No. 3 09050 -02040 Black φ6.4 mm T-Rivet Nose piece No. 4 09050 -02050 Black φ4.0 mm Waterproof Special