cardiagn.com (a) Remove the 2 screws, 2 bolts and EMV. 6. REMOVE INTEGRATION CONTROL PANEL (w/ Navigation System) (a) Disconnect the connector clamps. (b) Remove the screw, the 2 bolts and radio receiver bracket RH. (c) Remove the integration control panel from the radio receiver. 7. REMOVE HEATER CONTROL PANEL ASSEMBLY (w/o Navigation System) (a) Disconnect the connector clamp. (b) Remove the 6 bolts and radio receiver bracket LH. (c) Disconnect the connector clamp. (d) Remove the 6 bolts and radio receiver bracket RH. (e) Remove the heater control panel.