LAND CRUISER J100 Repair Manual RM0010U VehicleInterior 2006 (EN)

Theft warning ECU assembly:

cardiagn.com Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM0000018SZ000X Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: AIR CONDITIONING: AIR CONDITIONING AMPLIFIER (for Rear Air Conditioning System): COMPONENTS; 2006 MY Land Cruiser [05/2005 - ] COMPONENTS ILLUSTRATION

Стр. 1

Theft warning ECU assembly:

cardiagn.com Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001BUP000X Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: AIR CONDITIONING: AIR CONDITIONING AMPLIFIER (for Rear Air Conditioning System): INSPECTION; 2006 MY Land Cruiser [05/2005 - ] INSPECTION 1. INSPECT A/C AMPLIFIER ASSEMBLY (a) Inspect A/C amplifier assembly .

Стр. 2

Theft warning ECU assembly:

cardiagn.com Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM0000018SY000X Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: AIR CONDITIONING: AIR CONDITIONING AMPLIFIER (for Rear Air Conditioning System): INSTALLATION; 2006 MY Land Cruiser [05/2005 - ] INSTALLATION Installation is in the reverse order of removal .

Стр. 3

Theft warning ECU assembly:

cardiagn.com Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM0000018T0000X Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: AIR CONDITIONING: AIR CONDITIONING AMPLIFIER (for Rear Air Conditioning System): REMOVAL; 2006 MY Land Cruiser [05/2005 - ] REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. HINT: At the time of installation, perform initialization . NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal. 2.

REMOVE REAR DOOR SCUFF PLATE RH 3. REMOVE REAR FLOOR MAT SUPPORT PLATE 4. REMOVE QUARTER TRIM PANEL RH 5. REMOVE A/C AMPLIFIER ASSEMBLY (a) Disconnect the connectors. (b) Remove the 2 screws and the A/C amplifier.

Стр. 4