Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001CIN002X agn Model Year Start: 2007 Model: Land Cruiser Prod Date Range: [08/2006 - ] Title: AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: Display Indicates when Power Switch Turned ON but no Sound cannot be Heard and Noise is Produced; 2007 MY Land Cruiser [08/2006 - ] Display Indicates when Power Switch Turned ON but no Sound cannot be Heard and Noise is Produced INSPECTION PROCEDURE PROCEDURE 1. CHECK CASSETTE TAPE PLAYER (a) Is cassette tape player operating normally? REPLACE RADIO RECEIVER OK ASSEMBLY NG 2. INSPECT FUSE (ACC, AMP) (a) Remove the ACC fuse from the cowl side junction block LH.
(b) Remove the AMP fuse from the engine room junction block. (c) Measure the resistance of the fuse. Standard resistance: Below 1 Ω NG REPLACE FUSE OK 3. CHECK WIRE HARNESS (STEREO COMPONENT AMPLIFIER - BATTERY AND BODY GROUND) REPAIR OR REPLACE HARNESS AND NG CONNECTOR OK 4. CHECK WIRE HARNESS (STEREO COMPONENT AMPLIFIER - SPEAKER) REPAIR OR REPLACE HARNESS AND NG CONNECTOR OK cardi OK REPLACE RADIO RECEIVER ASSEMBLY NG REPLACE FUSE NG REPAIR OR REPLACE HARNESS AND CONNECTOR NG REPAIR OR REPLACE HARNESS AND CONNECTOR