MC-909 TEST MODE part.eps Required equipment 1. Monitor speaker 2. MIDI cable 3. Audio cable 4. Optical (angular type) cable The MC-909 Menu screen will appear, and the LCD display will show the following. 5. Coaxial (pin) cable 6. USB cable fig.test3_70 7. SmartMedia (formatted; with protect label affixed) 8. SmartMedia (formatted; without protect label) 9. DIMM (for DIMM specifications, refer to Main Specifications) 10. Wave expansion board: SRX series 11. Computer (with USB connector; OS must be Windows Me, Windows 2000, or Windows XP) Starting up Test mode 1. Power-on the MC-909. 2. Hold down the [SHIFT] button and press the [F5] button.
The System screen will appear, and the LCD display will show the following. fig.test1_70 5. Press the [F5] button, and the LCD display will show the following. Test mode will start up. fig.test5_70 3. Press the [F6] button. The System Info screen will appear, and the LCD display will show the following. fig.test2_70 Basic operation in Test mode Basic operation of the controls is as follows. [F6] To the next test screen [F1] To the previous test screen [SHIFT]+[F6] Forcibly move to the next test screen [SHIFT]+[F1] Forcibly move to the previous test screen [MENU] or [SHIFT]+[MENU] Select test items When you enter the test item selection screen, the LCD display will show as follows. 4.
Hold down the [SHIFT] button and press the part buttons (see figure below) in the order of [1] -> [7] -> [8] -> [9]. 23