Troubleshooting en Note: The recommended continuous oper- ating time is 2 minutes. Tip: Season salads, sauces and other dishes with the ground peanuts or make them into crunchy peanut butter. Crunchy peanut butter Preparation Enjoy the finished peanut butter spread directly onto bread or use it as a season- ing. Retrieve more recipes To retrieve more recipes online, scan the following QR code. Process the ground peanuts another two times with the fine perforated disc. Add 10 ml peanut oil or vegetable oil for every 100 g peanuts. Stir the mixture with a whisk until creamy. Troubleshooting Troubleshooting Fault Cause and troubleshooting Appliance does not start processing.
Rotary switch is set incorrectly. Food is not being pro- cessed although the main unit is running. Food has got stuck and is blocking the attachment. Note: Only use the reversing function with the meat mincer at- tachment. 1. Set the rotary switch to and wait until the appliance stops. 2. Set the rotary switch to for a few seconds to start the re- Set the rotary switch to before processing. versing function and release the food that has got stuck. 3. Wait until the appliance stops. 4. Set the rotary switch to and check whether the food is being processed normally again. Note: If the fault cannot be eliminated in this manner, observe the following steps. 1.
Set the rotary switch to and wait until the appliance stops. 2. Remove the attachment and take it apart. 3. Remove food that has got stuck und check whether the at- tachment or the food contains any sinews, bones or other hard pieces. The clutch of the worm conveyor has been overloaded and has broken at the predetermined breaking point. Note: Spare parts with a predetermined breaking point are not covered by our warranty obligations. A new clutch is available from customer service under order number 10039417. 1. Release the screw and remove the faulty clutch. Fig. 44 2. Insert the new clutch and screw in tight. Appliance switches off during processing. Motor is overheated. 1.
Set the rotary switch to and wait until the appliance stops. 2. Allow the appliance to cool down to deactivate the overload Fig. 45 protection device. 23