3. To install the mopping assembly, slide it into the back of the vacuum- mop until it clicks into place. Press the button or use the Mi Home/ Xiaomi Home app to start the cleanup. The vacuum-mop will automatically recognize the mopping assembly and begin mopping and dispensing water as needed. 4. Remove the mopping assembly After the vacuum-mop finishes cleaning and returns to the charging dock, press the side clips of the mopping assembly inward and pull to remove the assembly. CAUTION: · To prevent the vacuum-mop from entering a carpeted area, use physical barriers or set up virtual walls or restricted areas in the app before mopping.
· The mop pad should be cleaned after every 30 minutes of use to ensure adequate water flow and cleaning effectiveness. Note: When the vacuum-mop is charging or not in use, remove the mopping assembly. Pour out all remaining water in the tank, and clean the mop pad to prevent mildew or lingering odors. 13