Screw, M2.5Ч 8mm Figure 2-8. Removing the Icon PCA and Display Assembly Reassembly Notes • After connecting the inverter/MB cable from the right hinge, carefully dress the wires into the cutout and support in the top case. Caution • For a 12-inch display, tuck the excess length of the LCD flex cable under the keyboard. The cable could be damaged if there is excess length in the hinge area. • Use a 5 mm screw to fasten the LCD cable. If you use a longer screw, it will damage the motherboard. Do not overtighten the screws for the LCD cable. They fasten to a sheet-metal bracket and the threads could strip. • Insert the right end of the icon PCA between the plastic tabs on the case.
Check that the IR/icon cable is not pinched and emerges above the PCA. • Slide the open end of the hinge cover onto the hinge, then lift the closed end over the bump and slide it in. HP OmniBook 2100/3000/3100 Removal and Replacement 2-11 Icon PCA Screw, M2.5×5mm Note: Two screws secure the cable for a 12" display. Note: 13-inch display shown For a 12-inch display, display cables differ. . the