Load Cell Module DVP02LC-SL 3.3 Terminal Layout CH1 CH2 DVP02LC-SL 3.4 LED Indicators 4 Installation and Wiring 4.1 Connecting DVP02LC-SL to DVP-SV series PLC MPU z Open the fixing clips on the top and bottom at the left side of DVP-SV series PLC MPU. Meet the connection ports alongside the 4 corners of DVP02LC-SL with DVP-SV, as step ① . z Press the fixing clips on the top and bottom of the DVP-SV series PLC MPU and check if the connection is tight enough, as step ② .
2 DVP02LC POWER RUN EXC+ EXC- DVP28SV ERROR L.V CH1 SEN+ SIG- SIG+ MAX ZERO NET SEN- SHD MOTION EXC+ EXC- 1 NET ZERO CH2 SEN+ SIG+ SEN- SIG- MOTION MAX SHD RUN STOP 2 DVP-PLC Operation Manual 6 EXC+ EXC- SIG+ SIG- SEN+ SEN- SHD EXC + EXC- SIG+ SIG- SEN+ SEN- SHD LED Color Function POWER Green Indicating the power supply status. RUN Green Indicating the operating status of DVP02LC-SL. ERROR Red Indicating error statuses. L.V Red Indicating low voltage from the external power supply. NET Orange Indicating net/gross weights. ZERO Orange Indicating the zero point weight. MAX Orange Indicating the maximum weight. MOTION Orange Indicating stable measurements.