1. Firmware version of Pendant may require update. See Pendant manual for the procedure. 2. Provides no method to communicate with the robot using ENET which is required for certain service procedures. 3. The additional ENET port should not be used for robot operation, and would not serve a functional purpose. 4. Only needed if you are using ePLC with Omron PLC. 16 1.2x) Robot Vision Manager (for ACE 4.x and Sysmac Studio 1.2x) 20410-000 X X X X ACE Pack Manager with ACE Robot Vision Manager (for ACE 4.x and Sysmac Studio 1.2x). License contains an ACE PackManager license and an ACE Robot Vision Manager license.
20433-000 X X X X Sysmac Studio Standard Edition Version 1.xx SYSMAC-SE201L X4 X X4 X Sysmac Studio 3D Simulation Option SYSMAC-SA401L-64 X4 X X4 X