N500 INSTRUCTION MANUAL Explanation of Function 2) Setting method of parameter value (Example:
Change of frequency parameter) [F01] Out_F Set [F01] Out_F Set [F01] Out_F Set [F01] Out_F Set [F01] Out_F Set [F01] Out_F Set [F01] Out_F Set [F01] Out_F Set [F01] Out_F Set [F01] Out_F Set [F01] Out_F Set [F01] Out_F Set 020 020 020 020.34Hz .34Hz .34Hz .34Hz 020.34Hz 20.34Hz 20.34Hz 20.34Hz 0 0 0 020.34Hz 0.34Hz 0.34Hz 0.34Hz Push the ▶ KEY (Start changing) Change the value by ▲ or ▼ KEY Push the ▶ KEY (Change cursor position) Note) Although pushing the STR KEY, the store function will be canceled and the parameter value will be back to the previous value when changing mode which is unchangeable on run and setting value exceed the range..
2.2.5 Reading all parameter values from inverter [ Param. Read ] [ Param. Read ] [ Param. Read ] [ Param. Read ] Downloading OK ! Downloading OK ! Downloading OK ! Downloading OK ! Read Key Read Key Read Key Read Key -> Run > Run > Run > Run Hit any Key . . . Hit any Key . . . Hit any Key . . . Hit any Key . . . Note) It is impossible to read parameter values on run. 2-4 [F01] Out F Set _ 030.34Hz Push the FUNC KEY to cancel setting [F01] Out F Set _ 020.34Hz Push the STR KEY to store the value processing Downloading . . . >>>>>>>>> End READ In case of error EEPROM fail ! Hit any Key . . .