This Template has been created to have “1”, “2”, ”3”, or “4” as the communication Unit No. to four Digital Controllers. NB10_1Zone_E5CC_Template_E_Rev100c is designed for 1 Controller and NB10_4Zone_E5CC_Template_E_Rev100c for 4 Controllers. If the communication unit No. is other number than “1”, “2” ,”3”, or “4”, modify the communications unit No. in the Template following the procedure as below. 2.1. Method to specify the Communications unit No. of Digital Controller in Template 5 2. Method to specify the Communication Unit No. of Digital Controller 1 Start NB-Designer and open E5CC Template window.
2 Double-click a Digital Controller which should be changed with the communications unit No. and open setting dialog.