D1031 For 24SV2, the number of pulses produced by CH4 (High word) D1032 For 24SV2, the number of pulses produced by CH5 (Low word) D1033 For 24SV2, the number of pulses produced by CH5 (High word) D1127: For EH2/SV/EH3/SV2, the number of pulses in the acceleration section in the position instruction (low word) D1128: For EH2/SV/EH3/SV2, the number of pulses in the acceleration section in the position instruction (high word) D1133: For EH2/SV/EH3/SV2, the number of pulses in the deceleration section in the position instruction (low word) D1134:
For EH2/SV/EH3/SV2, the number of pulses in the deceleration section in the position instruction (high word) D1147 For 24SV2, the time it takes for CH4 to accelerate/decelerate the production of pulse output. D1149 For 24SV2, the time it takes for CH5 to accelerate/decelerate the production of pulse output. D1196 For 24SV2, when M1568 is ON, users can set the time it takes for CH4 to decelerate the production of pulse output. D1197 For 24SV2, when M1569 is ON, users can set the time it takes for CH5 to decelerate the production of pulse output. the last two bits; other bits are invalid. 1. K0: Y0 output 2. K1: Y0, Y1 AB-phase output; A ahead of B. 3. K2: Y0, Y1 AB-phase output; B ahead of A.
4. K3: Y1 output D1221: For EH/EH2/SV/EH3/SV2, phase setting of CH1 (Y2, Y3): D1221 determines the phase by D1220: For EH/EH2/SV/EH3/SV2, phase setting of CH0 (Y0, Y1): D1220 determines the phase by the last two bits; other bits are invalid. 1. K0: Y2 output 2. K1: Y2, Y3 AB-phase output; A ahead of B. 3. K2: Y2, Y3 AB-phase output; B ahead of A. 4. K3: Y3 output D1222: For EH/EH2/SV/EH3/SV2, the time difference between the direction signal and pulse output sent by CH0. D1223: For EH/EH2/SV/EH3/SV2, the time difference between the direction signal and pulse output sent by CH1. D1229: For EH2/SV/EH3/SV2, phase setting of CH2 (Y4, Y5):
D1229 determines the phase by the last two bits; other bits are invalid. 1. K0: Y4 output 2. K1: Y4, Y5 AB-phase output; A ahead of B. 3. K2: Y4, Y5 AB-phase output; B ahead of A. 4. K3: Y5 output D1230: For EH2/SV/EH3/SV2, phase setting of CH3 (Y6, Y7): D1230 determines the phase by the last two bits; other bits are invalid. 1. K0: Y6 output 2. K1: Y6, Y7 AB-phase output; A ahead of B. 3. K2: Y6, Y7 AB-phase output; B ahead of A. 4. K3: Y7 output