Name and Function of Each Part Rear panel 24 No. Name Description 1 Pause button Printing is paused and the print head comes to a stop either on the flushing plate or at the cleaning station area. Press the [Start] icon for Leonardo to resume printing. 2 Feed button Press and hold this button to feed the belt in the forward direction (from rear to front). 3 Feeding unit button (On) Press this button to turn ON (enable) the feeding unit. (Turn ON when adjusting the fabric position and when the slack mode is enabled.) 4 Feeding unit button (Off) Press this button to turn OFF (disable) the feeding unit. 5 Slack detection switch Use this switch to change the operation of the Slack sensor.
Off:Disable On: Enable 6 Pressure roller switch Use this switch to change the operation of the pressure roller. If you spin it to the left then let go, the switch auto- matically returns to the standby position (center). If you spin it to the right, the switch stays in that position and contin- ues operation. To stop operation, manually return the switch to the standby position (center). Left: Moves the pressure roller up/down. Each time the switch is turned to the left, the pressure roller moves up/down. How- ever, the roller moves up automatically if it was down for a given amount of time when the belt is stopped. Right: Moves the pressure roller forward/backward.
Turn to the right to operate, or to the center to stop the pressure roller. The roller stops in the up position when stopped. 7 Back feed button Press and hold this button to feed the belt in the reverse direction (from front to rear).