ML-32000-340/ML-32000-180/ML-16000-180 Operation Guide (EN)

Operation Guide Name and Function of Each Part Workflow before Beginning Work Print Workflow Workflow When Turning Off the Power When Not Using the Printer Troubleshooting Specifications Original instructions M00139408EN Rev.I

Стр. 1

Cautions • No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permis- sion of Seiko Epson Corporation. • The contents of this document are subject to change without notice. Please contact us for the latest informa- tion. • While every precaution has been taken in the preparation of this document, Seiko Epson Corporation assumes no responsibility for errors or omissions. • Neither is any liability assumed for damages resulting from the use of the information contained herein.

• Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third par- ties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

• Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by Seiko Epson Corporation. Trademarks Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. All other trademarks are the property of their respective owners and used for identification purpose only. Manual Organization The manuals for the product are organized as shown below. The latest manuals are available from qualified service personnel.

• ML-32000-340 / ML-32000-180 / ML-16000-180 Safety Precautions: This manual explains the safety precautions. Make sure you read this manual to perform operations safely. • ML-32000-340 / ML-32000-180 / ML-16000-180 Operation Guide: This manual explains how to use the printer. • ML-32000-340 / ML-32000-180 / ML-16000-180 Maintenance Guide: This manual explains how to perform maintenance of the printer. • Leonardo Reference Guide: This manual explains how to use Leonardo. Images Used in this Manual The images used in this manual may differ from your machine. Unless otherwise stated, this document uses images of the ML-32000-180. ©Seiko Epson Corporation 2021–2024 2

Стр. 2

Symbols in This Manual

Important Safety Information This section describes the symbols that are used both in this manual and on this machine. Be sure to read this manual and the separate "Safety Precautions" carefully before using this machine. Store this manual in a safe location where it can be easily referred to whenever you have a question. Symbols in This Manual The following symbols are used in this manual and on this machine to ensure that this machine is used safely and correctly in order to prevent injury to the user and other persons and damage to property. Please carefully read and understand these warnings before using this machine.

Symbols in This Manual 3 WARNING This symbol indicates that incorrect operation could result in death or serious injury. CAUTION This symbol indicates that incorrect operation could result in injury and/or damage to property. This symbol indicates a supplementary explanation or additional information that the user should know. Indicates actions that must not be taken (prohibited actions). Indicates actions that must be taken and/or instructions that must be followed. Do not disassemble Do not touch No flames Eye protection required Protective gloves required Protective clothing required Respiratory protec- tion required Hair net required

Стр. 3

Symbols in This Manual

User Permissions 4 This symbol indicates user permissions for general users who have been trained in the operation of the machine by Epson or an H user, to perform cleaning and simple maintenance procedures while protective devices are engaged and the machine is set to normal operation on the button panel. “L” is assigned to the operator of the machine. This symbol indicates user permissions for users who have been officially trained in the operation of this machine by Epson or an H user, to perform some functions and maintenance procedures that are allowed in addition to all of the functions for L.

“H” is assigned to the machine administrator, who manages maintenance keys and is in control of jobs in general. This user must inform User L of the information in this manual, and have access to the manual at all times. Checks and maintenance can be performed routinely or in unusual situations only if formal training has been received from Epson or an H user. It is strongly recommended to make all L users aware of their responsibilities when operating this machine. To that end, it is also important to collect from them all information regarding recommen- dations, complaints, suggestions, and anomalies that might occur.

Стр. 4