Chapter 6 Control Terminals MS300 (High Speed Model) Wiring precautions: Delivery condition is +24V/ S1/ S2 shorted by jumper (as shown in figure above), please refer to Chapter 4 Wiring for more details. RELAY terminal is using PCB terminal block: 1. Tighten the wiring with slotted screwdriver, which is 3.5 mm (wide) x 0.6 mm (thick) 2. The ideal length of stripped wire at the connection side is 6~7mm. 3. When wiring bare wires, make sure they are perfectly arranged to go through the wiring holes. Control terminal is using spring clamp terminal block: 1. Tighten the wiring with slotted screwdriver, which is 2.5 mm (wide) x 0.4 mm (thick) 2.
The ideal length of stripped wire at the connection side is 9mm. 3. When wiring bare wires, make sure they are perfectly arranged to go through the wiring holes. A B D (MAX) W Unit: mm Ferrule: Type: AI 0,5 - 8 WH , Manufacturer: PHOENIX CONTACT 6-2 Specifications of Control Terminal Specifications of RELAY Terminal Wire Gauge: 20~18AWG [0.519~0.82 mm2] Wire Gauge: 24~16 AWG [0.205~1.3 mm2]; Torque:
5 kg-cm / [4.3 Ib-in.] / [0.49 Nm] Distribution Diagram of Control Terminal 0-20mA 4-20mA 0-10V 0-10V 0-20mA 4-20mA NPN PNP USB ACI AFM +24V S1 S2 DCM SG+ SG- SGND MCM 1 DATAMATRIX SLOT 24P Safety function 32637012 RELAY +10V ACM AVI ACI AFM MO1 MO2 RA RB RC RS485 +24V +24V DCM DCM DFM Port MI1 MI2 MI3 MI4 MI5 MI6 MI7 Location Map of Control Terminal +24V S1 S2 DCM SG+ SG- SGND MCM Safety function MI2 MI3 MI4 MI5 MI6 MI7 +24V +24V DCM DCM DFM RS48 Port Wiring Specifications of Control Terminal Wire Gauge (AWG) Min. Wire Gauge Max.
Wire Gauge Conductor cross section solid 20 AWG [0.519 mm2] 18 AWG [0.82 mm2] Conductor cross section stranded Stranded with ferrules with plastic sleeve 20 AWG [0.519 mm2] 14 8 3.5 1.4