“ Error ” appears if there is an error. If there is no error, “ Normal ” appears. ２ - ３ Registering User Events Register the contents of the errors that are displayed on the User Events screen in the Sysmac Studio for the NJ/NX controller. 1. Select and double-click [Configurations and Setup]-[Event Settings]. Otherwise, right-click on it and select [Edit]. The “Event Settings” tab page opens. 2. Click the icon at the left bottom of the tab page. Register the following data in the cells for “Event Code/Event Name/Event Level/Group/Details”. ・ Event Code: １ ・ Event Name: Emergency Stop Button Pressed ・ Event Level: Emergency Stop ・ Group: Safety ・ Details:
The emergency stop button equipped on the control panel was pressed. 3. If you create an Excel file like the one shown on the right, you can directly copy and paste the contents to register them in “Event Settings”. Note: Do not copy the header of each column (i.e. Event Code, Event Name, etc.). Reference: Excel “event.xlsx” 4. Copy the contents of the Excel file and paste them in “Event Settings”. 9