４ .Description of the HMI Remote Viewer Screen ４ - ２ Setup Screen This screen sets devices to be connected. (1) (2) (3) (4) (5) 12 (6) (7) No Name Description 1 Thumbnail • Displays screens at a time when VNC was disconnected in thumbnail view. • Displays a Sysmac logo if no connection has been made. 2 Display name • Displays a screen name. • Displays a name under the thumbnail on the initial screen. • Displays an IP address under the thumbnail on the initial screen if no name is set. 3 IP/ Host • Displays an IP address to be connected. 4 Last connected • Displays the data and time when VNC was most recently connected.
5 “Connect” button • Connects VNC to the NA/NB with the current setting by pressing this button. 6 “Remove” button • Clears the current setting by pressing this button. • The cleared screen will not be displayed on the initial screen. 7 “Edit” button • Edits each setting by pressing this button.