５ .Setting Procedures ５ Setting Procedures To “install the HMI Remote Viewer to an iOS device” and “perform VNC to the NA”, the following procedure is required. Setting IP Address of the NJ Setting IP Address of the NA Setting the VNC function of the NA Setting with the Sysmac Studio Setting on the Device System Menu Setting the WE70-AP Network Settings for iPad Installing and Starting the HMI Remote Viewer The required settings and procedures to perform VNC connection between the iOS device and NA are described in the following pages. Additional Information To use VNC connection, setting for NJ is not necessarily required.
Additional Information When connecting to NB-series, the same procedure is used; however, replace the statement “ Setting IP Address of the NA” with “Setting IP Address of the NB”. 14