１０ .Network Setting for iOS Device １０ Network Setting for iOS Device To connect VNC to the NA using the HMI Remote Viewer, network setting for iOS is required. Perform the following procedure to set the iOS device network. 22 1. Start the iOS device. Touch ” Settings” on the home screen. Settings” on the home screen. 2. Touch “Wi-Fi” to display the setting screen for Wi-Fi. Enable Wi-Fi, and select a network name for the WE70-AP (default is “omronwe70wlan”). 3. Touch “omronwe70wlan” to open the network setting. 4. Set the network setting to ”Static” and set the IP address and subnet mask as follows; IP address：192.168.250.100 Subnet mask：255.255.255.0