１１ .Installing and Starting the HMI Remote Viewer １１ - ２ Starting the HMI Remote Viewer 24 1. After the HMI Remote Viewer is installed, ”HMI Viewer” is added on the home screen. Touch ”HMI Viewer” to start the HMI Remote Viewer. installed, ”HMI Viewer” is added on the home screen. Touch ”HMI Viewer” to start the HMI Remote Viewer. 2. Touch on the initial screen of the HMI Remote Viewer. 3. Set ”VNC-test (desired name)” to “Display name”, set “192.168.250.2 (IP address of the NA)” to ”IP/ Host”, and touch ”Save”. 4. Touch “Connect”.