7.3.3. Verify Parameters and Execute Builds Check the configuration parameters and execute program check and build of the project data. 22 1 Double-click [CPU EXPANSION RACKS] under "Configurations and Setup" in the Multiview Explorer. 2 The [CPU EXPANSION RACKS] Tab Page is displayed in the Edit Pane. Connect the Serial Communication Unit as shown on the right. Confirm that the setting value of [CJ1W-SCU22] is displayed, [Device name] is [J01], and [Unit No.] is [0]. * If the settings differ, change them to be the same as shown. Click on [Edit Special Unit Settings]. 3 The [0[Unit 0] : ] Tab is displayed. Select "Port 2:
Protocol macro settings "from the pull-down menu of" "Display parameter group".