No. 600 Prices Pounds Sterling Carriage Extra Issued December 2002 Section 5 Gearboxes / Changewheels 16 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl. VAT £ 1419 Thread dial indicator for attachment to right hand side of apron. Graduated to show when the leadscrew nut should be engaged on subsequent cuts when cutting whole or half T.P.I. 15.90 18.68 95/105 Thread dial indicator to suit imperial lathes, for attachment to right hand side of apron. Graduated to show when cutting whole or half number T.P.I.
Not suitable for use when cutting threads with metric conversion set number 95/077 on 254 imperial lathe, in which case the leadscrew nut must be left engaged 47.70 56.04 95/136 Thread dial indicator to suit metric lathes, for attachment to right hand side of apron. Fitted with reversible dial and pinion to cover common metric pitches.
Not suitable for use when cutting threads with imperial conversion set number 95/078 on 254 metric lathes, in which case the leadscrew nut must be left engaged 117.26 137.78 30/044 Set of 11 changewheels for cutting metric threads on lathes having imperial (8 T.P.I.) leadscrews, comprising one each 21, 27, 33, 36, 39, 42, 48, 50, 80 and two 63 tooth wheels 115.46 135.66 30/045 Set of three changewheels for cutting imperial threads on lathes having metric (3mm) leadscrews, comprising one each 40, 63 and two 80 tooth wheels 60.49 71.07 95/078 Set of 10 changewheels for cutting imperial threads on lathes having metric gearboxes, comprising one each 24, 27, 33, 36, 39, 42, 48, 57, 63 and 64 tooth wheel and a changewheel stud assembly 118.39 139.10 95/077 Set of eight changewheels for cutting metric threads on lathes having imperial gearboxes, comprising one each 28, 35, 45, 50, 60, 63 and two 30 tooth wheels and a changewheel stud assembly 97.23 114.24 A1974A/1 Fine feed tumbler cluster for feeds down to 0.045mm (0.0018); replaces the standard cluster gear on the tumbler reverse swing pin.
For ML-7R and Super 7, not ML-7RB or Super 7B 18.75 22.03 All Speed 10 lathes were fitted as standard with a leadscrew micrometer dial and pointer. These micrometer dials have 125 divisions, each representing 0.001. Metric micrometer dials are graduated in 0.02mm divisions. For old ML10 lathes and for existing Speed 10 lathes and Diamond 10 lathes, these micrometer dials are available separately as follows: 30/054 For lathes up to Serial No. V144354 - Imperial leadscrew. Leadscrew micrometer dial and pointer 5/16 bore 18.48 21.71 30/054/1 For lathes from Serial No. V144354 - Imperial leadscrew.
Leadscrew micrometer dial and pointer 3/8 bore 18.48 21.71 30/055 For lathes up to Serial No. V144464 - Metric leadscrew. Leadscrew micrometer dial and pointer 5/16 bore 18.48 21.71 30/055/1 For lathes up to Serial No. V144464 - Metric leadscrew. Leadscrew micrometer dial and pointer 3/8 bore 18.48 21.71 Note: A metric dial is not available for earlier lathes having metric feedscrews, but fitted with imperial leadscrews.