No. 600 Prices Pounds Sterling Carriage Extra Issued December 2002 Section 5 Gearboxes / Changewheels etc 15 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl. VAT £ 1680 Gearbox complete with hinged guard, installation and operating instructions 828.27 973.21 1481/1 Metric conversion set, comprising slotted quadrant, changewheels spacers and studs. Covers 29 pitches from 0.2 to 4mm 163.94 192.62 A2469/2 Slotted quadrant, for off pitches (included in 1481/1 set); enables use of standard changewheels 38.28 44.98 1485 Changewheel stud assembly.
Two required for use with A2469/2 quadrant for ML7-RB and Super 7B only 18.80 22.09 A3011/1 Quick change leadscrew (replacement for existing screw which can be modified) for ML7-R standard 19 between centres 56.26 66.10 A3939/1 Quick change leadscrew (replacement for existing screw which can be modified) for ML7-R standard 31 between centres 58.68 68.95 A3011/1 For Super 7, boxes QC2495/1 and upwards, lathes prior to SK115830, standard 19 between centres 56.26 66.10 A3839/1 For Super 7, boxes QC2495/1 and upwards, lathes prior to SK115830, long 31 between centres 58.68 68.95 A9221 For Super 7, SK115380 and onwards, standard 19 between centres 69.97 82.21 A9224 For Super 7, SK115380 and onwards, long 31 between centres 75.64 88.88 11285/ Changewheels:
Price Price Teeth Excl. VAT Incl. VAT Teeth 20*# 5.06 5.95 50*# 21# 5.31 6.24 51 22 5.57 6.54 53 24 6.07 7.13 54 25*# 6.33 7.44 55* 26 6.58 7.73 56 27 6.83 8.03 57 28 7.08 8.32 58 29 7.34 8.62 59 30*# 7.59 8.92 60*# 31 7.84 9.21 61 32 8.10 9.52 62 33 8.35 9.81 63 34 8.60 10.11 64 35*# 8.86 10.41 65*# 36 9.11 10.70 66 37 9.36 11.00 70*# 38* 9.61 11.29 75*# 39 9.87 11.60 80 40*# 10.12 11.89 81 42 10.63 12.49 85 43 10.88 12.78 90 44 11.13 13.08 91 45*# 11.39 13.38 95 46 11.64 13.68 100 47 11.89 13.97 127 48 12.14 14.26 Price Excl.
VAT 12.65 12.90 13.41 13.66 13.92 14.17 14.42 14.67 14.93 15.18 15.43 15.69 15.94 16.19 16.45 16.70 17.71 18.98 20.24 20.49 21.51 22.77 23.02 24.04 25.30 32.13 Price Incl.VAT 14.86 15.16 15.76 16.05 16.36 16.65 16.94 17.24 17.54 17.84 18.13 18.44 18.73 19.02 19.33 19.62 20.81 22.30 23.78 24.08 25.27 26.75 27.05 28.25 29.73 37.75 *Series 7 Lathes: These wheels comprise a standard set of changewheel lathes, but two 20 tooth are included in the set. For metric conversion for changewheel lathes, two 21 tooth wheels required per machine. A chart showing the use of these wheels can be supplied on request. #Series 10 Lathes:
These wheels comprise the standard set of changewheels for Series 10 machines with 3mm pitch leadscrew.