No. 600 Prices Pounds Sterling Carriage Extra Issued December 2002 Section 2 Workholding Equipment (Chucks / Backplates) 5 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl. VAT £ The following Chucks are to suit the standard BS4442 spindle 95/167 160mm (61/4) 4 jaw Independent Chuck 161.78 190.09 95/212 200mm (8) 4 jaw Independent Toolmex Chuck N.B. It is recommended that a maximum spindle speed of 1,400 rpm is not exceeded with this chuck, due to the high inertia loads on starting the machine. 197.77 232.37 95/066 125mm (5) 3 jaw G.S. “Griptru” Chuck with micro-adjusting screws for setting of true running of components.
Fitted to backplate 384.54 451.83 The following Chucks are to suit the 3 Camlock D1 Spindle 76092 160mm (61/4) 4 jaw Independent Chuck 161.78 190.09 76090 200mm (8) 4 jaw Independent Toolmex Chuck N.B. It is recommended that a maximum spindle speed of 1,400 rpm is not exceeded with this chuck, due to the high inertia loads on starting the machine. 197.77 232.37 95/212 125mm (5) 3 jaw G.S. “Griptru” Chuck with micro-adjusting screws for setting of true running of components. Fitted to backplate 384.54 451.83 76084 Set of 3 hexagon soft jaws, to fit 125mm (5) 3 jaw G.S.
chucks, code numbers 95/066 and 95/122 56.83 66.77 76085 Set of 3 hexagon soft jaws, to fit 125mm (5) 3 jaw G.S. chuck, code number 76062 (Standard equipment chuck) 56.83 66.77 76087 Set of 3 additional hexagons to suit 125mm (5) jaw blanks (76084 and 76085) 16.47 19.35 Backplates: 70/1138 Backplate for 100mm (4) 3 jaw Pratt Burnerd 15.50 18.21 70/1935 75mm (3) 3 jaw Burnerd lever scroll 15.50 18.21 A3091 127mm (5) dia.
for general purpose 16.50 19.38 70/1936 125mm (5) 4 jaw Independent 16.50 19.38 70/1934 150mm (6) 4 jaw Independent Burnerd 16.50 19.38 70/1932 150mm (6) 4 jaw Independent Pratt 16.50 19.38 The following Backplates are to suit the standard BS4442 spindle 95/102 (12307) drilled to suit (5) 3 jaw G.S. Pratt Burnerd Chuck, complete with three 12220 studs 38.47 45.20 95/103 (12307) not drilled, to suit (5) 3 jaw G.S. Pratt Burnerd Chuck, complete with three 12220 studs 38.47 45.20 The following Backplates are to suit the 3 Camlock D1 spindle 95/123 (12307) drilled to suit (5) 3 jaw G.S.
Pratt Burnerd Chuck, complete with three 76074 studs 38.47 45.20 95/124 (12307) not drilled, to suit (5) 3 jaw G.S. Pratt Burnerd Chuck, complete with three 76074 studs 38.47 45.20