No. 600 Prices Pounds Sterling Carriage Extra Issued December 2002 Section 2 Workholding Equipment (Backplates / Faceplates / Drill Chucks / Chuck Guards / Chuck Board) 6 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl. VAT £ Faceplates 70/1917 Faceplate 228mm (9) dia. for work which is too large for mounting on to the standard 170mm (63/4) dia. faceplate. It has eight radial slots for the securing bolts for workpieces or angle plates etc 31.72 37.27 70/1129 Faceplate 170mm (63/4) dia. with eight slots (supplied standard with machine) 21.77 25.57 A6546 Faceplate 150mm (6) dia.
with four slots (supplied standard with machine) 16.02 18.82 70/1137 Catchplate complete with driving peg 19.50 22.91 The following Faceplate is to suit the standard BS4442 spindle 95/173 254 plus 280mm (11) Faceplate for 254 plus models from serial number ZS164451 102.78 120.76 The following Faceplate is to suit the 3 Camlock D1 spindle 95/174 254 plus 280mm (11) Faceplate for 254 plus models from serial number ZS164451 102.78 120.76 NOTE: The 254 Type BS4442 Standard Spindle faceplates and additional chucks are not supplied with collar nuts for mounting. 95/098 Set of three additional collar nuts for chuck mounting.
(One set supplied with machine.) 8.34 9.79 Jacobs Drill Chucks, 3 jaw of the key type, with No. 2 Morse Taper Arbors 76031 0 - 12.5mm (1/2) with 76033 No. 2 M.T. Arbor 27.30 32.08 76066 4.76mm - 19.05mm (3/16 - 3/4) with 76067 No. 2 M.T.
Arbor 39.95 46.94 Spares for Jacobs 0 - 10mm (0 - 3/8) Drill Chuck 76030 Key 2.50 2.93 Spares for Jacobs 0 - 12.5mm (0 - 1/2) Drill Chuck 76031 Chuck body with key 24.37 28.63 76032 1MT Arbor (Jacobs 6JT) 4.01 4.71 76033 2MT Arbor (Jacobs 6JT) 4.18 4.91 76035 Key 2.58 3.03 Spares for Jacobs 4.76mm - 19.05mm (3/16 - 3/4) Drill Chuck 76066 Chuck body with key 36.84 43.29 76067 2MT Arbor (Jacobs JT6) 4.18 4.91 1640 Lever operated tailstock attachment. Can be readily interchanged with the standard handwheel and barrel whenever a number of components have to be drilled or centred. An adjustable stop is fitted for accurate depth control.
Maximum stroke 57mm (21/4) 235.33 276.51 Chuck Guards / Chuck Board 12910 Chuck board, for use when removing chucks. When fitted to the lathe bed protects the bed against accidental damage 10.81 12.70