1. Connection Procedure for Remote Access 6.3.4. Connection with the GateManager Connect the SiteManager to the internet and establish a connection with the GateManager. There are three ways to connect to the internet according to the device you use: (1) LAN connection, (2) 3G/4G connection and (3) WiFi connection. Make the settings according to the internet connection. Precautions for Correct Use The setting items vary with each of the internet connections (1) to (3) as mentioned above. In the following procedure, perform only those steps that are appropriate for the internet connection you use. (1) LAN connection Make the settings of 2. Uplink port.
1 Make sure an Internet-accessible Ethernet cable is connected to UPLINK port on SiteManager. Click Edit for 2. Uplink port. Startup Guide – Remote Access - RT1 Series - P151-E1-02 27