Connection Procedure for Remote Access 28 Startup Guide – Remote Access - RT1 Series - P151-E1-02 2 The setting screen for the port (UPLINK) connected to the internet appears. Select DHCP from the pull-down list in the Mode Field. Click Save. *If there is no change in the settings, the Save Button will be grayed out (disabled), which means no need to click on it. *If you need to make the settings with the static IP address, obtain the available IP address information from the network administrator and enter the values in the IP Address and Subnet Mask Fields. After completing the settings, click Continue Setup. The SETUP screen in step 1 appears again.
3 Check that SiteManager is connected to the internet and, with the LED on SiteManager, that communication with GateManager is established. ・STATUS: On GREEN