1. Connection Procedure for Remote Access (2) 3G/4G connection Make the settings of 3. Uplink2 (Mobile broadband). Startup Guide – Remote Access - RT1 Series - P151-E1-02 29 1 For model RT100-4G ensure the 3G/4G antenna is connected to the antenna connector and that the SIM card for 3G/4G communication is inserted in SIM card slot. Click Edit for 3. Uplink2 (Mobile broadband). *The figures on the right show the screenshots of the RT100- W5M3010 model. For other models the name can be different. E.g. Uplink2 (WiFi) 2 On the screen for 3G/4G connection settings, set the following items of connection information. Click Save.
・APN ・SIM PIN code ・User Name ・Password *These items of connection information are usually provided with the SIM card. If you cannot find them, contact your SIM card provider. After completing the settings, click Continue Setup. The SETUP screen in step 1 appears again.