7 ． EtherNet/IP Connection Procedure 17 2 Set the IP address of Personal Dialog box in (2) computer to 172.16.127.10. *The IP address can be changed in the following way. (1)Start Personal computer and log in using an administrator account. From the Windows Start menu, select Control Panel - Network and Internet - Network and Sharing Center, and click Change Adapter Settings. Double-click Local Area Connection. *The procedure steps may be different depending on the environment settings of Dialog box in (3) Personal computer. (2)The Local Area Connection Status Dialog Box is displayed. Click Properties. (3)The Local Area Connection Properties Dialog Box is displayed.
Select Internet Protocol Version 4 (TCP/IPv4), and click Properties. *The display differs depending on the configuration of Personal computer. (4)The Internet Protocol Version 4 (TCP/IPv4) Properties Dialog Box is displayed. Select Use the following IP Dialog box in (4) address, set the IP address to 172.16.127.10 and the subnet mask to 255.255.0.0. Click OK. (5)Click Close or OK to close all the displayed dialog boxes.