7 ． EtherNet/IP Connection Procedure 7.3.6. Transferring the Project Data Connect online and transfer the connection settings and the project data to Controller. When you transfer a user program, configuration data, setup data, device variables, or values in memory used for CJ-series Units from Sysmac Studio, the devices or machines may perform unexpected operation regardless of the operating mode of CPU Unit. Always confirm safety at the destination node before you transfer the project data. 32 1 Turn ON Controller and Switching hub. 2 Select Check All Programs from the Project Menu. 3 The Build Tab Page is displayed. Check that "0 Errors" and "0 Warnings" are displayed.
4 Select Rebuild Controller from the Project Menu. 5 A confirmation dialog box is displayed. Check the contents and click Yes. 6 Check that "0 Errors" and "0 Warnings" are displayed on the Build Tab Page.