Watching content from external devices With the connected equipment turned On Display the Input select menu Select the input mode (shortcut) press the corresponding NUMBER button on the remote control to select the input of your choice. Or, press the INPUT button repeatedly, to cycle through the available inputs. * set unused input to “Not used” (below) for quick skipping. 5 Component AUX or 6 Video (example) select enter Select the input of your choice, then press OK. Input label Setup ANT/Cable (p. 42) Basic Watching content from external devices Using VIERA TOOLS Edit Device labels Input labels (p.
48) HDMI 1 GAME Terminal Label During the selection, if no action is taken for several seconds, the “Input select” menu disappears. The terminal and label (names) of the connected equipment are displayed. (example) Note The input label will be displayed on the “Input select” screen if the Input label was customized. For side input terminals (HDMI 3), “GAME” Input label is set as default. Operate the connected equipment directly or using the remote control supplied with the equipment Note For details, see the manual for the connected equipment. 21 nput select 1 2 ANT/Cable In HDMI 1 Not used GAME 3 4 HDMI 2 HDMI 3