Network cameras list Before using a Network camera, you need to register the camera as shown below. You can also set Default camera or Disconnect/Delete the registered cameras. Press “Network cameras list” and display screen Start camera search. Before you start to search for a camera, switch the camera to registration mode. Search condition also depends on “Network settings” Set Network camera setting select Delete camera information. Disconnect to camera. “Disconnected” will be displayed in “Status”. Set to default use. Displayed “(Default)” next to camera name. For this operation, please refer to the operating manual for the Network camera.
(Available only when reconnecting) Connect to Camera. “Connect” will be displayed in “Status”. Software update Select “Software update” Press OK to start the Software update screen Follow directions on the screen Set “Clock” first. (p. 15) select OK 38 etwork cameras list Camera name Model Status Default Camera 1 BL-C210A Connected ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Select OK RETURN Find cameras Delete enu Network settings Connection test Network connection Wireless (WiFi) Wireless network IP address/DNS settings Network cameras list Software update Mac address 00-0b-97-7c-65-e9