Wireless network (Wireless network setting) Sets / Changes wireless network setting Press “Wireless network” and display setting screen Follow the directions on screen to complete the setting Wireless network select Search for Wireless networks: Select an Access point from the ones searched for automatically, and configure the settings as instructed on the screen. WPS (Wi-Fi Protected Setup* using push button): You can connect the Access point to press the buttons. WPS (Wi-Fi Protected Setup using PIN number): Set the PIN code that is displayed on the TV on the Access point. Manual settings:
Manually set SSID, Security type, and Encryption type to match the settings of the Access point to which to connect. When connecting by 11n (5 GHz), select “AES” as the Encryption type for the wireless LAN. Please choose connection method: OK WPS (Wi-Fi Protected Setup using push button) WPS (Wi-Fi Protected Setup using PIN number) Search for wireless networks Manual settings * Wi-Fi Protected Setup is an easy setting of the Wi-Fi Alliance’s certification For more details on setting of an Access point, please refer to operating manual for the Access point.
Advanced Using Network services IP address/DNS settings Select “IP/DNS setting mode” and set to “Automatic” (When IP/DNS automatic acquisition in DHCP can be used) Manual setting Select “IP/DNS setting mode” and set to “Manual” Select the item and press OK Check the specifications of the broadband router and enter each IP address. Or Enter each IP address as was specified by the provider select OK IP address OK 10 I 0 . 0 . 0 . 0 The acquired address is displayed. Each IP address is acquired automatically If you are using a broadband router, IP automatic acquisition in DHCP can be used under normal circumstances.
If you are not sure, check with the person who installed the equipment, or check the instructions for each device. Proxy setting Set only if specified by the provider. It is not required for normal household use. Select “Proxy setting” Proxy address This is the address of the relay server that is connected to the target server instead of the browser and sends data to the browser. Setting is only required if specified by the provider. Proxy port This number is specified by the provider together with the Proxy address. select OK Select item and press OK select OK Enter address or port number and press OK Entering characters (p.
19) 37 Menu IP address/DNS settings IP setting mode Automatic Automatic IP address Subnet mask Default gateway DNS setting mode DNS 192.168.0.5 255.255.255.0 192.168.0.254 Automatic 192.168.0.20 Menu IP address/DNS settings IP setting mode Automatic IP address 192.168.0.5 Subnet mask 255.255.255.0 Default gateway 192.168.0.254 DNS setting mode Automatic DNS 192.168.0.20 Proxy setting Menu Proxy setting Proxy address Proxy port 0