Network settings This is a setting for connecting to a broadband environment. Display the menu Select “Network settings” Menu Setup 1/2 Channel surf mode select Language Clock All ANT/Cable setup Input labels Anti image retention Network settings VIERA Link settings Press to exit from a menu screen Select the settings and set Menu Network settings select Connection test Network connection Wireless network Wireless (WiFi) adjust Press to go back to the previous screen Network cameras list IP address/DNS settings Software update Mac address 00-0b-97-7c-65-e9 36 Connection tes t Check that the Network settings are as shown below, and then start “Connection test”.
Select “Connection test” and press OK Complete Connection test (It takes a while to cancel the test.) Success-->Completion screen is displayed. Displayed Connection test screen Error-->Follow the directions on screen to complete the setting. If you perform the Proxy settings, check the Proxy address Connection test and the Proxy port number. Check Ethernet cable connection Validate IP address Check for IP address duplication Check connection to the Internet Check communication with EASY IPTV server. Test in progress...
Network connection Select Network type (Ethernet cable/Wireless (WiFi)) Wireless network (Confirm Current settings and status) This setting is performed only when “Wireless (WiFi)” is selected in “Network connection” above. ■Displayed “Current settings and status” screen (If connected with wireless LAN adapter) You can confirm the AP connection status. (SSID/Wireless type/Security type/Encryption type/Connection status /Signal strength) Press “Wireless network” When you change “Wireless network” -->Press “No” See “Sets / Changes wireless network setting” on p. 37 Wireless network select and follow the directions on screen to complete the S WS irI eD l e: ss type : setting. Security type:
Encryption type : OK Connection status : You need to be “Connected” to use network devices. Signal strength : Connect using these settings? Please set Access point settings to “Connected”. Yes No (example) ireless network : ess type : rity type: yption type : ection status : al strength : ect using these settings? es No